Stream PHP ActiveX Reference Documentation

Stream

Current Version: 10.1.0

Provides a generic class for streaming from a source to a sink. Streams can be connected together where the sink of one feeds to the source of another.

Note: This class was added in Chilkat v9.5.0.56. Initially it will seem somewhat useless, but over time, streaming functionality will be added to existing Chilkat classes and will be prevalent in new Chilkat classes.

Object Creation

Chilkat v10.0.0 or greater:
$obj = new COM("Chilkat.Stream");
Chilkat v9.5.0.*:
$obj = new COM("Chilkat_9_5_0.Stream");

Properties

AbortCurrent
bool AbortCurrent
Introduced in version 9.5.0.58

When set to true, causes the currently running method to abort. Methods that always finish quickly (i.e.have no length file operations or network communications) are not affected. If no method is running, then this property is automatically reset to false when the next method is called. When the abort occurs, this property is reset to false. Both synchronous and asynchronous method calls can be aborted. (A synchronous method call could be aborted by setting this property from a separate thread.)

top
CanRead
bool CanRead (read-only)
Introduced in version 9.5.0.56

true if the stream supports reading. Otherwise false.

Note: A stream that supports reading, which has already reached the end-of-stream, will still have a CanRead value of true. This property indicates the stream's inherent ability, and not whether or not the stream can be read at a particular moment in time.

top
CanWrite
bool CanWrite (read-only)
Introduced in version 9.5.0.56

true if the stream supports writing. Otherwise false.

Note: A stream that supports writing, which has already been closed for write, will still have a CanWrite value of true. This property indicates the stream's inherent ability, and not whether or not the stream can be written at a particular moment in time.

top
DataAvailable
bool DataAvailable (read-only)
Introduced in version 9.5.0.56

true if it is known for sure that data is ready and waiting to be read. false if it is not known for sure (it may be that data is immediately available, but reading the stream with a ReadTimeoutMs of 0, which is to poll the stream, is the way to find out).

top
DebugLogFilePath
string DebugLogFilePath

If set to a file path, causes each Chilkat method or property call to automatically append it's LastErrorText to the specified log file. The information is appended such that if a hang or crash occurs, it is possible to see the context in which the problem occurred, as well as a history of all Chilkat calls up to the point of the problem. The VerboseLogging property can be set to provide more detailed information.

This property is typically used for debugging the rare cases where a Chilkat method call hangs or generates an exception that halts program execution (i.e. crashes). A hang or crash should generally never happen. The typical causes of a hang are:

  1. a timeout related property was set to 0 to explicitly indicate that an infinite timeout is desired,
  2. the hang is actually a hang within an event callback (i.e. it is a hang within the application code), or
  3. there is an internal problem (bug) in the Chilkat code that causes the hang.

More Information and Examples
top
DefaultChunkSize
int DefaultChunkSize
Introduced in version 9.5.0.56

The default internal chunk size for reading or writing. The default value is 65536. If this property is set to 0, it will cause the default chunk size (65536) to be used. Note: The chunk size can have significant performance impact. If performance is an issue, be sure to experiment with different chunk sizes.

top
EndOfStream
bool EndOfStream (read-only)
Introduced in version 9.5.0.56

true if the end-of-stream has already been reached. When the stream has already ended, all calls to Read* methods will return false with the ReadFailReason set to 3 (already at end-of-stream).

top
IsWriteClosed
bool IsWriteClosed (read-only)
Introduced in version 9.5.0.56

true if the stream is closed for writing. Once closed, no more data may be written to the stream.

top
LastBinaryResult
VARIANT LastBinaryResult (read-only)

The binary data returned by the last (binary data returning) method called. Only available if Chilkat.Global.KeepBinaryResult is set to true. This provides a means for obtaining large varbinary results in the SQL Server environment (where limitations exist in getting large amounts of data returned by method calls, but where temp tables can be used for binary properties).

top
LastErrorHtml
string LastErrorHtml (read-only)

Provides information in HTML format about the last method/property called. If a method call returns a value indicating failure, or behaves unexpectedly, examine this property to get more information.

top
LastErrorText
string LastErrorText (read-only)

Provides information in plain-text format about the last method/property called. If a method call returns a value indicating failure, or behaves unexpectedly, examine this property to get more information.

top
LastErrorXml
string LastErrorXml (read-only)

Provides information in XML format about the last method/property called. If a method call returns a value indicating failure, or behaves unexpectedly, examine this property to get more information.

top
LastMethodSuccess
bool LastMethodSuccess

Indicate whether the last method call succeeded or failed. A value of true indicates success, a value of false indicates failure. This property is automatically set for method calls. It is not modified by property accesses. The property is automatically set to indicate success for the following types of method calls:

  • Any method that returns a string.
  • Any method returning a Chilkat object, binary bytes, or a date/time.
  • Any method returning a standard boolean status value where success = true and failure = false.
  • Any method returning an integer where failure is defined by a return value less than zero.

Note: Methods that do not fit the above requirements will always set this property equal to true. For example, a method that returns no value (such as a "void" in C++) will technically always succeed.

top
LastStringResult
string LastStringResult (read-only)

The string return value of the last (string returning) method called. Only available if Chilkat.Global.KeepStringResult is set to true. This provides a means for obtaining large string results in the SQL Server environment (where limitations exist in getting long strings returned by method calls, but where temp tables can be used for string properties).

top
LastStringResultLen
int LastStringResultLen (read-only)

The length, in characters, of the string contained in the LastStringResult property.

top
Length
int64 Length
Introduced in version 9.5.0.56

The length (in bytes) of the stream's source. If unknown, then this property will have a value of -1. This property may be set by the application if it knows in advance the length of the stream.

top
Length32
int Length32
Introduced in version 9.5.0.58

The length (in bytes) of the stream's source. If unknown, then this property will have a value of -1. This property may be set by the application if it knows in advance the length of the stream.

Setting this property also sets the Length property (which is a 64-bit integer).

top
NumReceived
int64 NumReceived (read-only)
Introduced in version 9.5.0.56

The number of bytes received by the stream.

top
NumSent
int64 NumSent (read-only)
Introduced in version 9.5.0.56

The number of bytes sent by the stream.

top
ReadFailReason
int ReadFailReason (read-only)
Introduced in version 9.5.0.56

This property is automatically set when a Read* method is called. It indicates the reason for failure. Possible values are:

  1. No failure (success)
  2. Timeout, or no data is immediately available for a polling read.
  3. Aborted by an application callback.
  4. Already at end-of-stream.
  5. Fatal stream error.
  6. Out-of-memory error (this is very unlikely).

top
ReadTimeoutMs
int ReadTimeoutMs
Introduced in version 9.5.0.56

The maximum number of seconds to wait while reading. The default value is 30 seconds (i.e. 30000ms). A value of 0 indicates a poll. (A polling read is to return with a timeout if no data is immediately available.)

Important: For most Chilkat timeout related properties, a value of 0 indicates an infinite timeout. For this property, a value of 0 indicates a poll. If setting a timeout related property (or method argument) to zero, be sure to understand if 0 means "wait forever" or "poll".

The timeout value is not a total timeout. It is the maximum time to wait while no additional data is forthcoming.

top
SinkFile
string SinkFile
Introduced in version 9.5.0.56

Sets the sink to the path of a file. The file does not need to exist at the time of setting this property. The sink file will be automatically opened on demand, when the stream is first written.

Note: This property takes priority over other potential sinks. Make sure this property is set to an empty string if the stream's sink is to be something else.

More Information and Examples
top
SinkFileAppend
bool SinkFileAppend
Introduced in version 9.5.0.83

If true, the stream appends to the SinkFile rather than truncating and re-writing the sink file. The default value is false.

top
SourceFile
string SourceFile
Introduced in version 9.5.0.56

Sets the source to the path of a file. The file does not need to exist at the time of setting this property. The source file will be automatically opened on demand, when the stream is first read.

Note: This property takes priority over other potential sources. Make sure this property is set to an empty string if the stream's source is to be something else.

More Information and Examples
top
SourceFilePart
int SourceFilePart
Introduced in version 9.5.0.59

If the source is a file, then this property can be used to stream one part of the file. The SourceFilePartSize property defines the size (in bytes) of each part. The SourceFilePart and SourceFilePartSize have default values of 0, which means the entire SourceFile is streamed.

This property is a 0-based index. For example, if the SourceFilePartSize is 1000, then part 0 is for bytes 0 to 999, part 1 is for bytes 1000 to 1999, etc.

More Information and Examples
top
SourceFilePartSize
int SourceFilePartSize
Introduced in version 9.5.0.59

If the source is a file, then this property, in conjunction with the SourceFilePart property, can be used to stream a single part of the file. This property defines the size (in bytes) of each part. The SourceFilePart and SourceFilePartSize have default values of 0, which means that by default, the entire SourceFile is streamed.

More Information and Examples
top
StringBom
bool StringBom
Introduced in version 9.5.0.56

If true, then include the BOM when creating a string source via SetSourceString where the charset is utf-8, utf-16, etc. (The term "BOM" stands for Byte Order Mark, also known as the preamble.) Also, if true, then include the BOM when writing a string via the WriteString method. The default value of this property is false.

top
StringCharset
string StringCharset
Introduced in version 9.5.0.56

Indicates the expected character encoding, such as utf-8, windows-1256, utf-16, etc. for methods that read text such as: ReadString, ReadToCRLF, ReadUntilMatch. Also controls the character encoding when writing strings with the WriteString method. The supported charsets are indicated at the link below.

The default value is "utf-8".

More Information and Examples
top
VerboseLogging
bool VerboseLogging

If set to true, then the contents of LastErrorText (or LastErrorXml, or LastErrorHtml) may contain more verbose information. The default value is false. Verbose logging should only be used for debugging. The potentially large quantity of logged information may adversely affect peformance.

top
Version
string Version (read-only)

Version of the component/library, such as "9.5.0.94"

More Information and Examples
top
WriteFailReason
int WriteFailReason (read-only)
Introduced in version 9.5.0.56

This property is automatically set when a Write* method is called. It indicates the reason for failure. Possible values are:

  1. No failure (success)
  2. Timeout, or unable to immediately write when the WriteTimeoutMs is 0.
  3. Aborted by an application callback.
  4. The stream has already ended.
  5. Fatal stream error.
  6. Out-of-memory error (this is very unlikely).

top
WriteTimeoutMs
int WriteTimeoutMs
Introduced in version 9.5.0.56

The maximum number of seconds to wait while writing. The default value is 30 seconds (i.e. 30000ms). A value of 0 indicates to return immediately if it is not possible to write to the sink immediately.

top

Methods

LoadTaskCaller
bool LoadTaskCaller(Chilkat.Task task)
Introduced in version 9.5.0.80

Loads the caller of the task's async method.

Returns true for success, false for failure.

top
ReadBd
bool ReadBd(Chilkat.BinData binData)
Introduced in version 9.5.0.67

Read as much data as is immediately available on the stream. If no data is immediately available, it waits up to ReadTimeoutMs milliseconds for data to arrive. The incoming data is appended to binData.

Returns true for success, false for failure.

More Information and Examples
top
ReadBdAsync (1)
Chilkat.Task ReadBdAsync(Chilkat.BinData binData)
Introduced in version 9.5.0.67

Creates an asynchronous task to call the ReadBd method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns null on failure

More Information and Examples
top
ReadBytes
VARIANT ReadBytes()
Introduced in version 9.5.0.56

Read as much data as is immediately available on the stream. If no data is immediately available, it waits up to ReadTimeoutMs milliseconds for data to arrive.

Returns null on failure

top
ReadBytesAsync (1)
Chilkat.Task ReadBytesAsync()
Introduced in version 9.5.0.56

Creates an asynchronous task to call the ReadBytes method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns null on failure

top
ReadBytesENC
string ReadBytesENC(string encoding)
Introduced in version 9.5.0.56

The same as ReadBytes, except returns the received bytes in encoded string form. The encoding argument indicates the encoding, which can be "base64", "hex", or any of the multitude of encodings indicated in the link below.

Returns null on failure

More Information and Examples
top
ReadBytesENCAsync (1)
Chilkat.Task ReadBytesENCAsync(string encoding)
Introduced in version 9.5.0.56

Creates an asynchronous task to call the ReadBytesENC method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns null on failure

top
ReadNBytes
VARIANT ReadNBytes(int numBytes)
Introduced in version 9.5.0.56

Reads exactly numBytes bytes from the stream. If no data is immediately available, it waits up to ReadTimeoutMs milliseconds for data to arrive.

Returns null on failure

top
ReadNBytesAsync (1)
Chilkat.Task ReadNBytesAsync(int numBytes)
Introduced in version 9.5.0.56

Creates an asynchronous task to call the ReadNBytes method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns null on failure

top
ReadNBytesENC
string ReadNBytesENC(int numBytes, string encoding)
Introduced in version 9.5.0.56

The same as ReadNBytes, except returns the received bytes in encoded string form. The encoding argument indicates the encoding, which can be "base64", "hex", or any of the multitude of encodings indicated in the link below.

Returns null on failure

More Information and Examples
top
ReadNBytesENCAsync (1)
Chilkat.Task ReadNBytesENCAsync(int numBytes, string encoding)
Introduced in version 9.5.0.56

Creates an asynchronous task to call the ReadNBytesENC method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns null on failure

top
ReadSb
bool ReadSb(Chilkat.StringBuilder sb)
Introduced in version 9.5.0.67

Read as much data as is immediately available on the stream. If no data is immediately available, it waits up to ReadTimeoutMs milliseconds for data to arrive. The data is appended to sb. The incoming bytes are interpreted according to the StringCharset property. For example, if utf-8 bytes are expected, then StringCharset should be set to "utf-8" prior to calling ReadSb.

Returns true for success, false for failure.

top
ReadSbAsync (1)
Chilkat.Task ReadSbAsync(Chilkat.StringBuilder sb)
Introduced in version 9.5.0.67

Creates an asynchronous task to call the ReadSb method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns null on failure

More Information and Examples
top
ReadString
string ReadString()
Introduced in version 9.5.0.56

Read as much data as is immediately available on the stream. If no data is immediately available, it waits up to ReadTimeoutMs milliseconds for data to arrive. The data is returned as a string. The incoming bytes are interpreted according to the StringCharset property. For example, if utf-8 bytes are expected, then StringCharset should be set to "utf-8" prior to calling ReadString.

Returns null on failure

top
ReadStringAsync (1)
Chilkat.Task ReadStringAsync()
Introduced in version 9.5.0.56

Creates an asynchronous task to call the ReadString method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns null on failure

top
ReadToCRLF
string ReadToCRLF()
Introduced in version 9.5.0.56

Reads the stream until a CRLF is received. If no data is immediately available, it waits up to ReadTimeoutMs milliseconds for data to arrive. The data is returned as a string. The incoming bytes are interpreted according to the StringCharset property. For example, if utf-8 bytes are expected, then StringCharset should be set to "utf-8" prior to calling ReadString.

Note: If the end-of-stream is reached prior to receiving the CRLF, then the remaining data is returned, and the ReadFailReason property will be set to 3 (to indicate end-of-file). This is the only case where as string would be returned that does not end with CRLF.

Returns null on failure

top
ReadToCRLFAsync (1)
Chilkat.Task ReadToCRLFAsync()
Introduced in version 9.5.0.56

Creates an asynchronous task to call the ReadToCRLF method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns null on failure

top
ReadUntilMatch
string ReadUntilMatch(string matchStr)
Introduced in version 9.5.0.56

Reads the stream until the string indicated by matchStr is received. If no data is immediately available, it waits up to ReadTimeoutMs milliseconds for data to arrive. The data is returned as a string. The incoming bytes are interpreted according to the StringCharset property. For example, if utf-8 bytes are expected, then StringCharset should be set to "utf-8" prior to calling ReadString.

Note: If the end-of-stream is reached prior to receiving the match string, then the remaining data is returned, and the ReadFailReason property will be set to 3 (to indicate end-of-file). This is the only case where as string would be returned that does not end with the desired match string.

Returns null on failure

top
ReadUntilMatchAsync (1)
Chilkat.Task ReadUntilMatchAsync(string matchStr)
Introduced in version 9.5.0.56

Creates an asynchronous task to call the ReadUntilMatch method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns null on failure

top
Reset
void Reset()
Introduced in version 9.5.0.56

Resets the stream. If a source or sink is open, then it is closed. Properties such as EndOfStream and IsWriteClose are reset to default values.

top
SetSourceBytes
bool SetSourceBytes(VARIANT sourceData)
Introduced in version 9.5.0.56

Sets the stream's source to the contents of sourceData.

Returns true for success, false for failure.

top
SetSourceString
bool SetSourceString(string srcStr, string charset)
Introduced in version 9.5.0.56

Sets the stream's source to the contents of srcStr. The charset indicates the character encoding to be used for the byte representation of the srcStr.

Returns true for success, false for failure.

top
ToDecimalStr
string ToDecimalStr(string propertyName)
Introduced in version 9.5.0.56

Some programming languages do not support 64-bit integers. The following properties are implemented as 64-bit ints: Length, NumReceived, NumSent. The value of these properties can be retrieved in decimal string form by passing the property name in propertyName.

Returns null on failure

top
WriteBd
bool WriteBd(Chilkat.BinData binData)
Introduced in version 9.5.0.67

Writes the contents of binData to the stream.

Returns true for success, false for failure.

top
WriteBdAsync (1)
Chilkat.Task WriteBdAsync(Chilkat.BinData binData)
Introduced in version 9.5.0.67

Creates an asynchronous task to call the WriteBd method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns null on failure

top
WriteByte
bool WriteByte(int byteVal)
Introduced in version 9.5.0.56

Writes a single byte to the stream. The byteVal must have a value from 0 to 255.

Returns true for success, false for failure.

top
WriteByteAsync (1)
Chilkat.Task WriteByteAsync(int byteVal)
Introduced in version 9.5.0.56

Creates an asynchronous task to call the WriteByte method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns null on failure

top
WriteBytes
bool WriteBytes(VARIANT byteData)
Introduced in version 9.5.0.56

Writes binary bytes to a stream.

Returns true for success, false for failure.

top
WriteBytesAsync (1)
Chilkat.Task WriteBytesAsync(VARIANT byteData)
Introduced in version 9.5.0.56

Creates an asynchronous task to call the WriteBytes method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns null on failure

top
WriteBytesENC
bool WriteBytesENC(string byteData, string encoding)
Introduced in version 9.5.0.56

Writes binary bytes to a stream. The byte data is passed in encoded string form, where the encoding can be "base64", "hex", or any of the supported binary encodings listed at the link below.

Returns true for success, false for failure.

More Information and Examples
top
WriteBytesENCAsync (1)
Chilkat.Task WriteBytesENCAsync(string byteData, string encoding)
Introduced in version 9.5.0.56

Creates an asynchronous task to call the WriteBytesENC method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns null on failure

top
WriteClose
bool WriteClose()
Introduced in version 9.5.0.56

Indicates that no more data will be written to the stream.

Returns true for success, false for failure.

top
WriteSb
bool WriteSb(Chilkat.StringBuilder sb)
Introduced in version 9.5.0.67

Writes the contents of sb to the stream. The actual bytes written are the byte representation of the string as indicated by the StringCharset property. For example, to write utf-8 bytes, first set StringCharset equal to "utf-8" and then call WriteSb.

Returns true for success, false for failure.

top
WriteSbAsync (1)
Chilkat.Task WriteSbAsync(Chilkat.StringBuilder sb)
Introduced in version 9.5.0.67

Creates an asynchronous task to call the WriteSb method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns null on failure

top
WriteString
bool WriteString(string str)
Introduced in version 9.5.0.56

Writes a string to a stream. The actual bytes written are the byte representation of the string as indicated by the StringCharset property. For example, to write utf-8 bytes, first set StringCharset equal to "utf-8" and then call WriteString.

Returns true for success, false for failure.

top
WriteStringAsync (1)
Chilkat.Task WriteStringAsync(string str)
Introduced in version 9.5.0.56

Creates an asynchronous task to call the WriteString method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns null on failure

top