Crypt2

// (Dataflex programs use the 32-bit Chilkat ActiveX)
Handle hoCrypt2
Get Create(RefClass(cComChilkatCrypt2)) to hoCrypt2

When set to True, causes the currently running method to abort. Methods that always finish quickly (i.e.have no length file operations or network communications) are not affected. If no method is running, then this property is automatically reset to False when the next method is called. When the abort occurs, this property is reset to False. Both synchronous and asynchronous method calls can be aborted. (A synchronous method call could be aborted by setting this property from a separate thread.)

top

The BCrypt work factor to be used for the BCryptHash and BCryptVerify. This is the log2 of the number of rounds of hashing to apply. For example, if the work (cost) factor is 12, then 2^12 rounds of hashing are applied. The purpose of this cost factor is to make the BCrypt computation expensive enought to prevent brute-force attacks. (Any complaints about BCrypt not being fast enough will be ignored.)

This property must have a value ranging from 4 to 31 inclusive.

The default value is 10.

top

The block-size (in bytes) of the selected encryption algorithm. For example, if the CryptAlgorithm property is set to aes, the BlockSize property is automatically set to 16. The block-size for the ARC4 streaming encryption algorithm is 1.

top

Applies to all methods that create PKCS7 signatures. To create a CAdES-BES signature, set this property equal to True. The default value of this property is False.

top

This is the base64 hash of the policy document located at the CadesSigPolicyUri. You can use either the SHA256 or SHA1 hash. You may use this online tool to compute the base64 hash: http://tools.chilkat.io/hashFileAtUrl.cshtml>Compute Base64 Hash for CaDES Signature Policy URL

Note: This property applies to all methods that create PKCS7 signatures. To create a CAdES-EPES signature, set the CadesEnabled property = True, and also provide values for each of the following properties: CadesSigPolicyHash, CadesSigPolicyId, and CadesSigPolicyUri. For example (in pseudo-code):

cryptObj.CadesSigPolicyId = <code>2.16.76.1.7.1.1.1</code>
cryptObj.CadesSigPolicyUri = <code>http://politicas.icpbrasil.gov.br/PA_AD_RB.der</code>
cryptObj.CadesSigPolicyHash = <code>rySugyKaMhiMR8Y/o5yuU2A2bF0=</code>

Note: Do NOT use the values above. They are only provided as an example to show valid values. For example, the Policy ID is an OID. The Policy URI is a typically a URL to a DER encoded policy file, and the Policy Hash is a base64 encoded hash.

top

See the description for the CadesSigPolicyHash property above.

top

See the description for the CadesSigPolicyHash property above.

top

This property specifies the character encoding used to represent text as bytes for encryption and hashing. By default, it uses the computer's ANSI charset, such as Windows-1252 for locales like the United States, United Kingdom, Western Europe, Australia, and New Zealand.

Most applications are advised to set this property to UTF-8. Chilkat plans to change its default to UTF-8 in a future major version to align with current standards. The current default of ANSI stems from a time when UTF-8 was not widely adopted.

top

Sets the cipher mode for block encryption algorithms (AES, Blowfish,TwoFish, DES, 3DES, RC2). Possible values are CBC (the default) , ECB, CTR, OFB, GCM, and CFB. These acronyms have the following meanings:

• CBC: Cipher Block Chaining,
• ECB: Electronic CookBook
• CTR: Counter Mode
• CFB: Cipher Feedback
• OFB: Output Feedback
• GCM: Galois/Counter Mode
• XTS: AES-XTS (starting in Chilkat v9.5.0.91, only works with AES encryption)

Prior to Chilkat v9.5.0.55, the CFB mode is only implemented for AES, Blowfish, and DES/3DES, and the CTR mode is only implemented for AES.

Starting in v9.5.0.55 CFB and OFB modes are useable with all encryption algorithms, and GCM (Galois/Counter Mode) is available with any cipher having a 16-byte block size, such as AES and Twofish. CFB, OFB, CTR, and GCM modes convert block ciphers into stream ciphers. In these modes of operation, the PaddingScheme property is unused because no padding occurs.

Starting in v9.5.0.91 Chilkat supports AES-XTS mode. XTS mode additionally uses a tweak key and tweak value, which are set via the XtsSetEncodedTweakKey, XtsSetEncodedTweakValue, and XtsSetDataUnitNumber. (The latter two functions provide alternative means of setting the tweak value.) Note: Chilkat fully supports AES-XTS mode with ciphertext-stealing, which means it will correctly encrypt/decrypt data with size not divisible by the block size (i.e. divisible by 16 bytes).

top

A JSON string for controlling extra CMS (PKCS7) signature and validation options.

top

Selects the encryption algorithm for encrypting and decrypting. Possible values are: chacha20, pki, aes, blowfish2, des, 3des, rc2, arc4, twofish, pbes1 and pbes2. The pki encryption algorithm isn't a specific algorithm, but instead tells the component to encrypt/decrypt using public-key encryption (PKCS7/CMS) with digital certificates. The other choices are symmetric encryption algorithms that do not involve digital certificates and public/private keys.

The default value is aes

The original Chilkat implementation of Blowfish (in 2004) has a 4321 byte-swapping issue (the results are 4321 byte-swapped). The newer implementation (in 2006 and named blowfish2) does not byte swap. This should be used for compatibility with other Blowfish software. If an application needs to decrypt something encrypted with the old 4321 byte-swapped blowfish, set the property to blowfish_old.

Password-based encryption (PBE) is selected by setting this property to pbes1 or pbes2. Password-based encryption is defined in the PKCS5 Password-Based Cryptography Standard at https://tools.ietf.org/html/rfc2898. If PBE is used, the underlying encryption algorithm is specified by the PbesAlgorithm property. The underlying encryption (PbesAlgorithm) for PBES1 is limited to 56-bit DES or 64-bit RC2.

Note:The chacha20 algorithm is introduced in Chilkat v9.5.0.55.

top

If set to a file path, this property logs the LastErrorText of each Chilkat method or property call to the specified file. This logging helps identify the context and history of Chilkat calls leading up to any crash or hang, aiding in debugging.

Enabling the VerboseLogging property provides more detailed information. This property is mainly used for debugging rare instances where a Chilkat method call causes a hang or crash, which should generally not happen.

Possible causes of hangs include:

• A timeout property set to 0, indicating an infinite timeout.
• A hang occurring within an event callback in the application code.
• An internal bug in the Chilkat code causing the hang.

top

Controls the encoding of binary data to a printable string for many methods. The valid modes are Base64, modBase64, base64url, Base32, Base58, UU, QP (for quoted-printable), URL (for url-encoding), Hex, Q, B, url_oauth, url_rfc1738, url_rfc2396, url_rfc3986, fingerprint, or decimal.

The default value is base64

The fingerprint anddecimal encodings are introduced in Chilkat v9.5.0.55.

The fingerprint encoding is a lowercase hex encoding where each hex digit is separated by a colon character. For example: 6a:de:e0:af:56:f8:0c:04:11:5b:ef:4d:49:ad:09:23

The decimal encoding is for converting large decimal integers to/from a big-endian binary representation. For example, the decimal string 72623859790382856 converts to the bytes 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08.

top

Using the FirstChunk and LastChunk properties is the way to do streaming encryption or decryption with Chilkat.

By default, both FirstChunk and LastChunk are set to True, indicating that the data passed to the encryption or decryption method is the full amount. To process data in multiple chunks, adjust these settings as follows:

1. For the first chunk, set FirstChunk = True and LastChunk = False.
2. For intermediate chunks, set both FirstChunk = False and LastChunk = False.
3. For the final chunk, set FirstChunk = False and LastChunk = True.

You can feed data chunks of any size, regardless of the encryption algorithm's block size (e.g., 16 bytes for AES). Chilkat will handle buffering and, upon receiving the final chunk, pad the output to the appropriate block size according to the selected PaddingScheme.

top

Selects the hash algorithm used by methods that create hashes. The valid choices are sha1, sha256, sha384, sha512, sha3-224, sha3-256, sha3-384, sha3-512, md2, md5, haval, ripemd128, ripemd160,ripemd256, or ripemd320.

Note: SHA-2 designates a set of cryptographic hash functions that includes SHA-256, SHA-384, and SHA-512. Chilkat by definition supports SHA-2 because it supports these algorithms.

The default value is sha256.

Note: The HAVAL hash algorithm is affected by two other properties: HavalRounds and KeyLength.

• The HavalRounds may have values of 3, 4, or 5.
• The KeyLength may have values of 128, 160, 192, 224, or 256.

Note: The sha3-224, sha3-256, sha3-384, sha3-512 algorithms are added in Chilkat v9.5.0.83.

top

Applies to the HAVAL hash algorithm only and must be set to the integer value 3, 4, or 5. The default value is 3.

top

Only applies when creating digital signatures. If True (the default), then additional certificates (if any) in the chain of authentication are included in the PKCS7 digital signature.

top

The initial counter for the ChaCha20 encryption algorithm. The default value is 0.

top

Iteration count to be used with password-based encryption (PBE). Password-based encryption is defined in the PKCS5 Password-Based Cryptography Standard at http://www.rsa.com/rsalabs/node.asp?id=2127

The purpose of the iteration count is to increase the computation required to encrypt and decrypt. A larger iteration count makes cracking via exhaustive search more difficult. The default value is 1024.

top

The initialization vector to be used with symmetric encryption algorithms (AES, Blowfish, Twofish, etc.). If left unset, no initialization vector is used.

top

The key length in bits for symmetric encryption algorithms. The default value is 256.

top

This property is mainly used in SQL Server stored procedures to retrieve binary data from the last method call that returned binary data. It is only accessible if Chilkat.Global.KeepBinaryResult is set to True. This feature allows for the retrieval of large varbinary results in an SQL Server environment, which has restrictions on returning large data via method calls, though temp tables can handle binary properties.

top

See the documentation for the FirstChunk property.

top

Provides HTML-formatted information about the last called method or property. If a method call fails or behaves unexpectedly, check this property for details. Note that information is available regardless of the method call's success.

top

Provides plain text information about the last called method or property. If a method call fails or behaves unexpectedly, check this property for details. Note that information is available regardless of the method call's success.

top

Provides XML-formatted information about the last called method or property. If a method call fails or behaves unexpectedly, check this property for details. Note that information is available regardless of the method call's success.

top

Indicates the success or failure of the most recent method call: True means success, False means failure. This property remains unchanged by property setters or getters. This method is present to address challenges in checking for null or Nothing returns in certain programming languages.

top

In SQL Server stored procedures, this property holds the string return value of the most recent method call that returns a string. It is accessible only when Chilkat.Global.KeepStringResult is set to TRUE. SQL Server has limitations on string lengths returned from methods and properties, but temp tables can be used to access large strings.

top

The length, in characters, of the string contained in the LastStringResult property.

top

Selects the MAC algorithm to be used for any of the Mac methods, such as MacStringENC, MacBytes, etc. The default value is hmac. Possible values are hmac and poly1305.

top

This property is set when a digital signature is verified. It contains the number of signer certificates. Each signing certificate can be retrieved by calling the GetSignerCert method, passing an index from 0 to NumSignerCerts-1.

top

Selects the hash algorithm for use within OAEP padding when encrypting using pki with RSAES-OAEP. The valid choices are sha1, sha256, sha384, sha512,

The default value is sha256

top

Selects the MGF hash algorithm for use within OAEP padding when encrypting using pki with RSAES-OAEP. The valid choices are sha1, sha256, sha384, sha512, The default is sha256.

top

Selects the RSA encryption scheme when encrypting using pki (with a certificate and private key). The default value is False, which selects RSAES_PKCS1-V1_5. If set to True, then RSAES_OAEP is used.

top

The padding scheme used by block encryption algorithms such as AES (Rijndael), Blowfish, Twofish, RC2, DES, 3DES, etc. Block encryption algorithms pad encrypted data to a multiple of algorithm's block size. The default value of this property is 0.

Possible values are:

0 = RFC 1423 padding scheme: Each padding byte is set to the number of padding bytes. If the data is already a multiple of algorithm's block size bytes, an extra block is appended each having a value equal to the block size. (for example, if the algorithm's block size is 16, then 16 bytes having the value 0x10 are added.). (This is also known as PKCS5 padding: PKCS #5 padding string consists of a sequence of bytes, each of which is equal to the total number of padding bytes added. )

1 = FIPS81 (Federal Information Processing Standards 81) where the last byte contains the number of padding bytes, including itself, and the other padding bytes are set to random values.

2 = Each padding byte is set to a random value. The decryptor must know how many bytes are in the original unencrypted data.

3 = Pad with NULLs. (If already a multiple of the algorithm's block size, no padding is added).

4 = Pad with SPACE chars(0x20). (If already a multiple of algorithm's block size, no padding is added).

top

If the CryptAlgorithm property is set to pbes1 or pbes2, this property specifies the underlying encryption algorithm to be used with password-based encryption (PBE). Password-based encryption is defined in the PKCS5 Password-Based Cryptography Standard at http://www.rsa.com/rsalabs/node.asp?id=2127

top

The password to be used with password-based encryption (PBE). Password-based encryption is defined in the PKCS5 Password-Based Cryptography Standard at http://www.rsa.com/rsalabs/node.asp?id=2127

top

When the CryptAlgorithm property is PKI to select PKCS7 public-key encryption, this selects the underlying symmetric encryption algorithm. Possible values are: aes, des, 3des, and rc2. The default value is aes.

top

The effective key length (in bits) for the RC2 encryption algorithm. When RC2 is used, both the KeyLength and Rc2EffectiveKeyLength properties should be set. For RC2, both should be between 8 and 1024 (inclusive).

The default value is 128

top

The salt to be used with password-based encryption (PBE). Password-based encryption is defined in the PKCS5 Password-Based Cryptography Standard at http://www.rsa.com/rsalabs/node.asp?id=2127

To clarify: This property is used in encryption when the CryptAlgorithm is set to pbes1 or pbes2. Also note that it is not used by the Pbkdf1 or Pbkdf2 methods, as the salt is passed in an argument to those methods.

top

The binary secret key used for symmetric encryption (Aes, Blowfish, Twofish, ChaCha20, ARC4, 3DES, RC2, etc.). The secret key must be identical for decryption to succeed. The length in bytes of the SecretKey must equal the KeyLength/8.

top

This property selects the signature algorithm for the OpaqueSign*, Sign*, and CreateDetachedSignature, CreateP7M, and CreateP7S methods. The default value is PKCS1-v1_5. This can be set to RSASSA-PSS (or simply pss) to use the RSASSA-PSS signature scheme.

Note: This property only applies when the private key is an RSA private key. It does not apply for ECC or DSA private keys.

top

Contains JSON to specify the authenticated (signed) attributes or unauthenticated (unsigned) attributes that are to be included in CMS signatures. The default value is:

{
    <code>contentType</code>: 1,
    <code>signingTime</code>: 1,
    <code>messageDigest</code>: 1
}

Other possible values that can be added are:

• signingCertificateV2
• signingCertificate
• sMIMECapabilities
• microsoftRecipientInfo
• encrypKeyPref
• cmsAlgorithmProtection

Contact Chilkat (support@chilkatsoft.com) about other signed/unsigned attributes that may be needed for CAdES signatures.

top

This is a catch-all property to be used for uncommon needs. This property defaults to the empty string and should typically remain empty.

Can be set to a list of the following comma separated keywords:

• UseConstructedOctets - Introduced in v9.5.0.83. When creating opaque CMS signatures (signatures that embed the data being signed), will use the constructed octets form of the ASN.1 that holds the data. This is to satify some validators that are brittle/fragile/picky and require a particular format, such as for the ICP-Brazil Digital Signature Standard.

top

When UU encoding, this is the filename to be embedded in UU encoded output. The default is file.dat. When UU decoding, this is the filename found in the UU encoded input.

top

When UU encoding, this is the file permissions mode to be embedded in UU encoded output. The default is 644. When UU decoding, this property is set to the mode found in the UU encoded input.

top

If set to True, then the contents of LastErrorText (or LastErrorXml, or LastErrorHtml) may contain more verbose information. The default value is False. Verbose logging should only be used for debugging. The potentially large quantity of logged information may adversely affect peformance.

top

Version of the component/library, such as "10.1.0"

top

Adds a certificate for public-key encryption. To enable public-key encryption with digital certificates, set the CryptAlgorithm property to pki. Call AddEncryptCert separately for each certificate you wish to use for encryption.

Any of the Encrypt* methods will do RSA public-key encryption when the CryptAlgorithm is set to the keyword pki. The output is a PKCS#7 enveloped-data secure container.

top

Adds a PFX file to the object's list of sources for locating certificates and private keys during public-key decryption or signing. To add multiple PFX sources, call this method multiple times. bd should contain the bytes of a PFX file (also known as PKCS12 or .p12).

Note: Information about the certificate(s) needed for public-key decryption are included in the PKCS#7 enveloped-data. Chilkat will automatically find a usable certificate and private key from sources like Windows certificate stores, the Apple keychain, or other sources provided by the application.

Returns True for success, False for failure.

top

Adds a PFX file to the object's list of sources for locating certificates and private keys during public-key decryption or signing. To add multiple PFX sources, call this method multiple times. pfxBytes should contain the bytes of a PFX file (also known as PKCS12 or .p12).

Returns True for success, False for failure.

top

Adds a PFX file to the object's list of sources for locating certificates and private keys during public-key decryption or signing. To add multiple PFX sources, call this method multiple times.

Note: Information about the certificate(s) needed for public-key decryption are included in the PKCS#7 enveloped-data. Chilkat will automatically find a usable certificate and private key from sources like Windows certificate stores, the Apple keychain, or other sources provided by the application.

Returns True for success, False for failure.

top

Call this method once per certificate to add multiple certificates for signing. If signing with a single certificate, then the SetSigningCert or SetSigningCert2 methods can be used instead.

Returns True for success, False for failure.

top

Implements the AES Key Wrap Algorithm (RFC 3394) for unwrapping. The kek is the Key Encryption Key (the AES key used to unwrap the wrappedKeyData). The arguments and return value are binary encoded strings using the encoding specified by encoding (which can be base64, hex, base64url, etc.) The full list of supported encodings is available at the link below.

The kek should be an AES key of 16 bytes, 24 bytes, or 32 bytes (i.e. 128-bits, 192- bits, or 256-bits). For example, if passed as a hex string, then the kek should be 32 chars in length, 48 chars, or 64 chars (because each byte is represented as 2 chars in hex).

The wrappedKeyData contains the data to be unwrapped. The result, if decoded, is 8 bytes less than the wrapped key data. For example, if a 256-bit AES key (32 bytes) is wrapped, the size of the wrapped key data is 40 bytes. Unwrapping restores it to the original 32 bytes.

Returns null on failure

top

Implements the AES Key Wrap with Padding Algorithm (RFC 5649) for unwrapping. The kek is the Key Encryption Key (the AES key used to unwrap the wrappedKeyData). The arguments and return value are binary encoded strings using the encoding specified by encoding (which can be base64, hex, base64url, etc.)

The kek should be an AES key of 16 bytes, 24 bytes, or 32 bytes (i.e. 128-bits, 192- bits, or 256-bits). For example, if passed as a hex string, then the kek should be 32 chars in length, 48 chars, or 64 chars (because each byte is represented as 2 chars in hex).

The wrappedKeyData contains the data to be unwrapped.

The unwrapped key is returned as an encoded string (using the encoding specified in encoding).

Returns null on failure

top

Implements the AES Key Wrap Algorithm (RFC 3394). The kek is the Key Encryption Key (the AES key used to encrypt the keyData). The arguments and return value are binary encoded strings using the encoding specified by encoding (which can be base64, hex, base64url, etc.) The full list of supported encodings is available at the link below.

The kek should be an AES key of 16 bytes, 24 bytes, or 32 bytes (i.e. 128-bits, 192- bits, or 256-bits). For example, if passed as a hex string, then the kek should be 32 chars in length, 48 chars, or 64 chars (because each byte is represented as 2 chars in hex).

The keyData contains the data to be key wrapped. It must be a multiple of 64-bits in length. In other words, if the keyData is decoded to binary, it should be a number of bytes that is a multiple of 8.

The return string, if decoded to binary bytes, is equal to the size of the key data + 8 additional bytes.

Returns null on failure

top

Implements the AES Key Wrap with Padding Algorithm (RFC 5649). The kek is the Key Encryption Key (the AES key used to encrypt the keyData). The arguments and return value are binary encoded strings using the encoding specified by encoding (which can be base64, hex, base64url, etc.)

The kek should be an AES key of 16 bytes, 24 bytes, or 32 bytes (i.e. 128-bits, 192- bits, or 256-bits). For example, if passed as a hex string, then the kek should be 32 chars in length, 48 chars, or 64 chars (because each byte is represented as 2 chars in hex).

The keyData contains the data to be key wrapped.

Returns the wrapped key using the encoding specified in encoding.

Returns null on failure

top

Computes and returns a bcrypt hash of the password. The number of rounds of hashing is determined by the BCryptWorkFactor property.

Starting in v9.5.0.76, if the password is prefixed with $2b$ then the output will use the $2b version of bcrypt. For example, to create a $2b$ bcrypt has for the password secret, pass in the string $2b$secret for password.

Returns null on failure

top

Verifies the password against a previously computed BCrypt hash. Returns True if the password matches the bcryptHash. Returns False if the password does not match.

Returns True for success, False for failure.

top

File-to-file decryption that supports files of any size by using internal streaming mode.

Returns True for success, False for failure.

top

Creates an asynchronous task to call the CkDecryptFile method with the arguments provided.

Returns null on failure

top

File-to-file encryption that operates in streaming mode, allowing it to encrypt files of any size.

Returns True for success, False for failure.

top

Creates an asynchronous task to call the CkEncryptFile method with the arguments provided.

Returns null on failure

top

Clears the internal list of digital certificates to be used for public-key encryption.

top

Clears the set of certificates to be used in signing.

Returns True for success, False for failure.

top

Co-sign's an existing CMS signature. bdIn contains the existing CMS signature. If successful, cert is the output co-signed CMS signature.

Returns True for success, False for failure.

top

Computes a CRC for data contained in crcAlg, which can be either crc-32 used in the Zip file format, or crc8 for the CRC8 algorithm.

top

Calculates a CRC for byte data in memory using the CRC algorithm specified by crcAlg. Possible algorithms are:

• crc-32 - This is the CRC used in the Zip file format.
• crc8

top

Calculates the CRC for a file's contents using the CRC algorithm specified by crcAlg. Possible algorithms are:

• crc-32 - This is the CRC used in the Zip file format.
• crc8

top

Creates an asynchronous task to call the CrcFile method with the arguments provided.

Returns null on failure

top

Signs the contents of inFilename and writes the enveloping (i.e. opaque) PKCS7 signature (.p7m) to p7mPath.

In a PKCS#7/CMS signature, the signer computes a cryptographic hash (e.g. SHA-256) of the data, then uses their private key to sign that hash.

The signature = Sign( Hash(data) )

This signed hash is what gets stored in the signature file. For enveloping/opaque signatures, the signed data is also stored in the signature file.

Set the HashAlgorithm property to specify the hash algorithmg. The valid options are sha256, sha1, sha384, and sha512.

Returns True for success, False for failure.

top

Creates an asynchronous task to call the CreateP7M method with the arguments provided.

Returns null on failure

top

Signs the contents of inFilename and writes the detached PKCS7 signature (.p7s) to p7sPath.

In a PKCS#7/CMS detached signature, the signer computes a cryptographic hash (e.g. SHA-256) of the data, then uses their private key to sign that hash.

The signature = Sign( Hash(data) )

This signed hash is what gets stored in the signature file.

Set the HashAlgorithm property to specify the hash algorithmg. The valid options are sha256, sha1, sha384, and sha512.

Returns True for success, False for failure.

top

Creates an asynchronous task to call the CreateP7S method with the arguments provided.

Returns null on failure

top

Decodes from an encoding back to the original string. The encoding can be set to any of the following strings: base64, hex, quoted-printable, url, base32, Q, B, url_rc1738, url_rfc2396, url_rfc3986, url_oauth, uu, modBase64, or html (for HTML entity encoding).

Returns null on failure

top

Decrypts the contents of bd. This method can do either symmetric key decryption or CMS public key decryption (e.g., PKCS#7 EnvelopedData).

Before calling this method for symmetric key decryption (e.g., AES, ChaCha20, Blowfish, etc.), ensure the following setup:

1. Define the encryption algorithm using the CryptAlgorithm property.
2. Specify the encryption key length with the KeyLength property.
3. Establish the cipher mode through the CipherMode property.
4. Use the SetEncodedIV method to set the IV, if needed by the cipher mode.
5. Set the encryption key with the SetEncodedKey method.
6. Ensure the PaddingScheme property matches the encryptor's value.

When calling this method for public key decryption (i.e. decrypting a PKCS7 CMS message), the following setup is required:

1. The CryptAlgorithm property should be set to the string "pki".
2. Optionally specify the certificate to be used for decryption by calling SetDecryptCert. If SetDecryptCert is not called, then Chilkat will automatically search certificate sources (Windows certificate stores, Apple keychain, etc.) for the required certificate.

Returns True for success, False for failure.

top

Decrypts a byte array and returns the unencrypted byte array. The property settings used when encrypting the data must match the settings when decrypting. Specifically, the CryptAlgorithm, CipherMode, PaddingScheme, KeyLength, IV, and SecretKey properties must match.

Returns null on failure

top

Decrypts string-encoded encrypted data and returns the unencrypted byte array. Data encrypted with EncryptBytesENC can be decrypted with this method. The property settings used when encrypting the data must match the settings when decrypting. Specifically, the EncodingMode, CryptAlgorithm, CipherMode, PaddingScheme, KeyLength, IV, and SecretKey properties must match.

Returns null on failure

top

Decrypts encoded encrypted data, and returns the decrypted data as a binary encoded string. For example:

The encoding (e.g. base64, hex, etc.) is determined by the EncodingMode property.

This method supports symmetric key and public key decryption. For more information on properties that affect decryption, such as CryptAlgorithm, CipherMode, etc., refer to the DecryptBd method documentation.

Returns null on failure

top

This function is intended for use when the expected decrypted output is text. It decrypts the contents of bdIn and appends the resulting string to sbOut. Ensure that the Charset property, such as utf-8, matches the one used during encryption to interpret the decrypted bytes correctly as characters.

This method supports symmetric key and public key decryption. For more information on properties that affect decryption, such as CryptAlgorithm, CipherMode, etc., refer to the DecryptBd method documentation.

Returns True for success, False for failure.

top

This function is intended for use when the expected decrypted output is text. It decrypts binary encoded encrypted bytes passed in cipherText and appends the resulting string to secureStr. Ensure that the Charset property, such as utf-8, matches the one used during encryption to interpret the decrypted bytes correctly as characters.

The encoding (e.g. base64, hex, etc.) is determined by the EncodingMode property.

This method supports symmetric key and public key decryption. For more information on properties that affect decryption, such as CryptAlgorithm, CipherMode, etc., refer to the DecryptBd method documentation.

Returns True for success, False for failure.

top

Decrypts a previously encrypted string, using the Charset property to interpret the decrypted bytes as characters.

Returns null on failure

top

This function is intended for use when the expected decrypted output is text. It decrypts binary encoded encrypted bytes passed in str and appends the resulting string to ARG2. Ensure that the Charset property, such as utf-8, matches the one used during encryption to interpret the decrypted bytes correctly as characters.

The encoding (e.g. base64, hex, etc.) is determined by the EncodingMode property.

This method supports symmetric key and public key decryption. For more information on properties that affect decryption, such as CryptAlgorithm, CipherMode, etc., refer to the DecryptBd method documentation.

Returns null on failure

top

Encode binary data to base64, hex, quoted-printable, or URL-encoding. The encoding can be set to any of the following strings: base64, hex, quoted-printable (or qp), url, base32, Q, B, url_rc1738, url_rfc2396, url_rfc3986, url_oauth, uu, modBase64, or html (for HTML entity encoding).

Returns null on failure

top

Encodes an integer to N bytes and returns in the specified encoding. If littleEndian is True, then little-endian byte ordering is used. Otherwise big-endian byte order is used.

Returns null on failure

top

Encodes a string. The toEncodingName can be set to any of the following strings: base64, hex, quoted-printable, url, base32, Q, B, url_rc1738, url_rfc2396, url_rfc3986, url_oauth, uu, modBase64, or html (for HTML entity encoding). The charsetName is important, and usually you'll want to specify ansi. For example, if the string ABC is to be encoded to hex using ANSI, the result will be 414243. However, if unicode is used, the result is 410042004300.

Returns null on failure

top

Encrypts the contents of bd. This method can do either symmetric key encryption or CMS public key encryption (e.g., PKCS#7 EnvelopedData).

Before calling this method for symmetric key encryption (e.g., AES, ChaCha20, Blowfish, etc.), ensure the following setup:

1. Define the encryption algorithm using the CryptAlgorithm property.
2. Specify the encryption key length with the KeyLength property.
3. Establish the cipher mode through the CipherMode property.
4. Use the SetEncodedIV method to set the IV, if needed by the cipher mode.
5. Set the encryption key with the SetEncodedKey method.
6. Set the PaddingScheme property if needing something different than the default.

When calling this method for public key encryption (i.e. creating a PKCS7 CMS message), the following setup is required:

1. The CryptAlgorithm property should be set to the string "pki".
2. To specify the encryption certificate, use SetEncryptCert. For multiple certificates, call AddEncryptCert for each one.

Returns True for success, False for failure.

top

Encrypts a byte array. The minimal set of properties that should be set before encrypting are: CryptAlgorithm, SecretKey. Other properties that control encryption are: CipherMode, PaddingScheme, KeyLength, IV. When decrypting, all property settings must match otherwise garbled data is returned.

Returns null on failure

top

Encrypts a byte array and returns the encrypted data as an encoded (printable) string. The minimal set of properties that should be set before encrypting are: CryptAlgorithm, SecretKey, EncodingMode. Other properties that control encryption are: CipherMode, PaddingScheme, KeyLength, IV. When decrypting, all property settings must match otherwise garbled data is returned. The encoding of the string that is returned is controlled by the EncodingMode property, which can be set to Base64, QP, or Hex.

Returns null on failure

top

Encrypts binary-encoded data and returns it as a binary-encoded string. For example:

The encoding (e.g. base64, hex, etc.) is determined by the EncodingMode property.

This method supports symmetric key and public key decryption. For more information on properties that affect decryption, such as CryptAlgorithm, CipherMode, etc., refer to the method documentation.

Returns null on failure

top

Encrypts text and appends the encrypted bytes in bdOut. The Charset property, such as utf-8, determines the actual bytes that are encrypted.

This method supports symmetric key and public key encryption. For more information on properties that affect encryption, such as CryptAlgorithm, CipherMode, etc., refer to the EncryptBd method documentation.

Returns True for success, False for failure.

top

Identical to EncryptStringENC, except the clear-text contained within the secureStr is encrypted and returned.

Returns null on failure

top

Encrypts a string and returns the result as bytes, with the Charset property determining the specific byte encoding of what gets encrypted.

Returns null on failure

top

Encrypts a string and returns the encrypted bytes as a binary encoded string. The EncodingMode property determines the binary encoding, such as base64, hex, hex_lower, base64url, base58, etc. The Charset property determines the actual bytes that are encrypted.

Returns null on failure

top

Important: In the v9.5.0.49 release, a bug involving this method was introduced: The encoding is ignored and instead the encoding used is the current value of the EncodingMode property. The workaround is to make sure the EncodingMode property is set to the value of the desired output encoding. This problem will be fixed in v9.5.0.50.

Identical to the GenerateSecretKey method, except it returns the binary secret key as a string encoded according to encoding, which may be base64, hex, url, etc. Please see the documentation for GenerateSecretKey for more information.

Returns null on failure

top

Generates a random UUID string having standard UUID format, such as de305d54-75b4-431b-adb2-eb6b9e546014.

Note: This generates a version 4 UUID using random byte values. See RFC 4122.

Returns null on failure

top

Generates numBytes random bytes and returns them as an encoded string. The encoding, such as base64, hex, etc. is controlled by the EncodingMode property.

Returns null on failure

top

Returns the authenticated additional data as an encoded string. The encoding argument can be set to any of the following strings: base64, hex, quoted-printable, or url.

The Aad is used when the CipherMode is gcm (Galois/Counter Mode), which is a mode valid for symmetric ciphers that have a block size of 16 bytes, such as AES or Twofish.

Returns null on failure

top

Returns the authentication tag as an encoded string. The encoding argument may be set to any of the following strings: base64, hex, quoted-printable, or url. The authentication tag is an output of authenticated encryption modes such as GCM when encrypting. When GCM mode decrypting, the authenticate tag is set by the application and is the expected result.

The authenticated tag plays a role when the CipherMode is gcm (Galois/Counter Mode), which is a mode valid for symmetric block ciphers that have a block size of 16 bytes, such as AES or Twofish.

Returns null on failure

top

Returns the initialization vector as an encoded string. The encoding argument can be set to any of the following strings: base64, hex, quoted-printable, or url.

Returns null on failure

top

Returns the secret key as an encoded string. The encoding argument can be set to any of the following strings: base64, hex, quoted-printable, or url.

Returns null on failure

top

Returns the password-based encryption (PBE) salt bytes as an encoded string. The encoding argument can be set to any of the following strings: base64, hex, quoted-printable, or url.

Returns null on failure

top

Provides information about what transpired in the last method called. For many methods, there is no information. For some methods, details about what transpired can be obtained via LastJsonData. For example, after calling a method to verify a signature, the LastJsonData will return JSON with details about the algorithms used for signature verification.

top

This method retrieves the signing time of the Nth certificate used in a digital signature, after verification. The first certificate's signing time is at index index 0. The NumSignerCerts property indicates the total number of signing certificates (typically, only one is used).

Note: Before retrieving the signing time for a certificate, use the HasSignatureSigningTime method to check its availability. Skip indices without a signing time.

The signing time is returned in RFC822 string format.

Returns null on failure

top

Extracts the signed (authenticated) attributes for the Nth signer. In most cases, a signature has only one signer, and the signerIndex should equal 0 to specify the 1st (and only) signer.

The binary PKCS7 is passed in pkcs7Der. On success, the sbJson will contain the signed attributes in JSON format.

Sample JSON output:

{
  <code>signedAttributes</code>: [
    {
      <code>oid</code>: <code>1.2.840.113549.1.9.3</code>,
      <code>name</code>: <code>Content Type</code>
    },
    {
      <code>oid</code>: <code>1.2.840.113549.1.9.5</code>,
      <code>name</code>: <code>Signing Time</code>
    },
    {
      <code>oid</code>: <code>1.2.840.113549.1.9.4</code>,
      <code>name</code>: <code>Message Digest</code>
    },
    {
      <code>oid</code>: <code>1.2.840.113549.1.9.16.2.47</code>,
      <code>name</code>: <code>Signing Certificate V2</code>
    }
  ]
}

Returns True for success, False for failure.

top

Hashes the bytes in bd and returns the hash as a binary-encoded string. The hash algorithm is determined by the HashAlgorithm property, while the encoding is specified by the EncodingMode property. Encoding options include base64, hex, base64url, or others listed at the link below.

Returns null on failure

top

To hash binary data in chunks, start by hashing the first chunk using this method. For additional chunks, use the HashMoreBytes method as needed. Complete the process with HashFinal or HashFinalENC to obtain the hash result. The hash algorithm used is determined by the HashAlgorithm property setting.

Returns True for success, False for failure.

top

To hash a large amount of text, start by processing the first chunk using this method. For subsequent chunks, use the HashMoreString method as needed. Conclude by calling HashFinal (or HashFinalENC) to obtain the final result. The hash algorithm is determined by the HashAlgorithm property setting.

Returns True for success, False for failure.

top

Hashes a byte array using the algorithm specified by the HashAlgorithm property.

Returns null on failure

top

Hashes a byte array and returns the hash as a binary encoded string.

The hash algorithm is specified by the HashAlgorithm property, The encoding is controlled by the EncodingMode property, which can be set to base64, hex, base64url, or any of the encodings listed at the link below.

Returns null on failure

top

Start or continue hashing data in chunks. Set firstChunk to True for the first chunk, and False for subsequent chunks. Finish by calling HashFinalENC to obtain the result. The hash algorithm used is determined by the HashAlgorithm property.

Returns True for success, False for failure.

top

Hashes a file using the specified HashAlgorithm and returns the hash bytes. The file is processed in streaming mode, allowing any file size to be hashed efficiently while minimizing memory usage.

Returns null on failure

top

Creates an asynchronous task to call the HashFile method with the arguments provided.

Returns null on failure

top

Hashes a file and returns the hash as an encoded string.

The hash algorithm is specified by the HashAlgorithm property, The encoding is controlled by the EncodingMode property, which can be set to base64, hex, base64url, or any of the encodings listed at the link below.

Any size file is supported because the file is hashed internally in streaming mode (keeping memory usage low and constant).

Returns null on failure

top

Creates an asynchronous task to call the HashFileENC method with the arguments provided.

Returns null on failure

top

Finalizes a multi-step hash computation and returns the hash bytes.

Returns null on failure

top

Finalizes a multi-step hash computation and returns the hash bytes encoded according to the EncodingMode property setting.

Returns null on failure

top

Adds more bytes to the hash currently under computation. (See HashBeginBytes)

Returns True for success, False for failure.

top

Adds more text to the hash currently under computation. (See HashBeginString)

Returns True for success, False for failure.

top

Hashes a string using the Charset property to determine the bytes and returns the hash.

Returns null on failure

top

Hashes a string and returns the hash bytes as an encoded string.

The hash algorithm is specified by the HashAlgorithm property, The encoding is controlled by the EncodingMode property, which can be set to base64, hex, base64url, or any of the encodings listed at the link below.

The Charset property controls the character encoding of the string that is hashed. Languages such as VB.NET, C#, and Visual Basic work with Unicode strings. If it is desired to hash Unicode directly (2 bytes/char) then set the Charset property to Unicode. To implicitly convert to another charset before hashing, set the Charset property to the desired charset. For example, if Charset is set to iso-8859-1, the input string is first implicitly converted to iso-8859-1 (1 byte per character) before hashing. The full list of supported charsets is listed in the EncryptString method description.

Returns null on failure

top

This method can be called after a digital signature has been verified by one of the Verify* methods. Returns True if a signing time for the Nth certificate is available and can be retrieved by either the GetSignatureSigningTime or GetSignatureSigningTimeStr methods.

top

Implements RFC 4226: HOTP: An HMAC-Based One-Time Password Algorithm. The arguments to this method are:

• secret: The shared secret in an enocded representation such as base64, hex, ascii, etc.
• secretEnc: The encoding of the shared secret, such as base64
• counterHex: The 8-byte counter in hexidecimal format.
• numDigits: The number of decimal digits to return.
• truncOffset: Normally set this to -1 for dynamic truncation. Otherwise can be set in the range 0..15.
• hashAlg: Normally set to sha1. Can be set to other hash algorithms such as sha256, sha512, etc.

Returns null on failure

top

Returns in cert the last certificate used for public-key decryption.

Returns True for success, False for failure.

top

Returns the Nth certificate used for signing in cert. This method can be called after verifying a digital signature to get the signer certs. The 1st certificate is at index 0. The NumSignerCerts property contains the total number of signing certificates. (Typically, a single certificate is used in creating a digital signature.)

Returns True for success, False for failure.

top

Loads the caller of the task's async method.

Returns True for success, False for failure.

top

Computes a Message Authentication Code (MAC) for the bytes in bd using the algorithm defined in the MacAlgorithm property. The result is then encoded to a string using the format specified by the EncodingMode property (e.g., base64, hex). The HashAlgorithm property setting determines the hash algorithm used internally. (A MAC algorithm like HMAC uses a hash function such as SHA-256 internally, along with a secret key, to create a secure and verifiable digest.)

Returns null on failure

top

Computes a Message Authentication Code using the algorithm defined in the MacAlgorithm property. The HashAlgorithm property setting determines the hash algorithm used internally. (A MAC algorithm like HMAC uses a hash function such as SHA-256 internally, along with a secret key, to create a secure and verifiable digest.)

Returns null on failure

top

Computes a Message Authentication Code using the MAC algorithm specified in the MacAlgorithm property. The result is encoded to a string using the encoding (base64, hex, etc.) specified by the EncodingMode property.

Returns null on failure

top

Computes a Message Authentication Code using the specified MacAlgorithm property. The Charset property determines the actual bytes presented to the MAC algorithm. The HashAlgorithm property setting determines the hash algorithm used internally. (A MAC algorithm like HMAC uses a hash function such as SHA-256 internally, along with a secret key, to create a secure and verifiable digest.)

Returns null on failure

top

Computes a Message Authentication Code using the MAC algorithm specified in the MacAlgorithm property. The result is encoded to a string using the encoding (base64, hex, etc.) specified by the EncodingMode property.

Returns null on failure

top

Matches MySQL's AES_DECRYPT function. strEncryptedHex is a hex-encoded string of the AES encrypted data. The return value is the original unencrypted string.

Returns null on failure

top

Matches MySQL's AES_ENCRYPT function. The return value is a hex-encoded string of the encrypted data. The equivalent call in MySQL would look like this: HEX(AES_ENCRYPT('The quick brown fox jumps over the lazy dog','password'))

Returns null on failure

top

Digitally signs the contents of bd. If successful, the contents of bd are replaced with the PKCS#7 signed-data, which embeds the original data within the signature. Ensure a certificate is set using SetSigningCert before invoking this method. The HashAlgorithm property specifies the hash algorithm for creating the data's hash during signing.

Returns True for success, False for failure.

top

Creates an asynchronous task to call the OpaqueSignBd method with the arguments provided.

Returns null on failure

top

Digitally signs a binary data and returns the signature in PKCS#7 signed-data format, which embeds the original data within the signature. Ensure a certificate is set using SetSigningCert before invoking this method. The HashAlgorithm property specifies the hash algorithm for creating the data's hash during signing.

Returns null on failure

top

Creates an asynchronous task to call the OpaqueSignBytes method with the arguments provided.

Returns null on failure

top

Digitally signs a binary data and returns a PKCS#7 signed-data signature binary-encoded as a string. The returned signature embeds the original data. Ensure to set a certificate by calling SetSigningCert beforehand. The EncodingMode property determines the output encoding such as base64, hex, base64_mime, etc. The HashAlgorithm property specifies the hash algorithm for creating the data's hash during signing.

Returns null on failure

top

Creates an asynchronous task to call the OpaqueSignBytesENC method with the arguments provided.

Returns null on failure

top

Digitally signs a string and returns PKCS#7 signed-data. The Charset property determines the actual bytes that are hashed and signed. The HashAlgorithm property specifies the hash algorithm for creating the data's hash during signing.

Returns null on failure

top

Creates an asynchronous task to call the OpaqueSignString method with the arguments provided.

Returns null on failure

top

Digitally signs a string and returns PKCS#7 signed-data as a binary encoded string. The EncodingMode property determines the binary encoding, such as base64, hex, hex_lower, base64_mime, etc. The Charset property determines the actual bytes that are hashed and signed. The HashAlgorithm property specifies the hash algorithm for creating the data's hash during signing.

Returns null on failure

top

Creates an asynchronous task to call the OpaqueSignStringENC method with the arguments provided.

Returns null on failure

top

The method performs in-place verification of the PKCS#7 signed-data content of bd. If the signature is successfully verified, the content of bd is replaced with the original data, and the method returns True. If verification fails, bd remains unchanged, and the method returns False. Afterwards, you can retrieve signer certificates by using the NumSignerCerts property and the GetSignerCert method.

Returns True for success, False for failure.

top

Verifies a PKCS#7 signed-data signature and returns the original data. If the signature fails verification, the returned data will be empty. Afterwards, you can retrieve signer certificates by using the NumSignerCerts property and the GetSignerCert method.

Returns null on failure

top

Verifies a PKCS#7 signed-data signature and returns the original data. If the signature fails verification, the returned data will be empty. The p7m is a binary-encoded string, using the encoding set by the EncodingMode property. Afterwards, you can retrieve signer certificates by using the NumSignerCerts property and the GetSignerCert method.

Returns null on failure

top

This function verifies a PKCS#7 signed-data signature and returns the original text data. If the signature does not verify successfully, it returns an empty string. The Charset property specifies how the original data bytes are converted to characters. You can obtain signer certificates using the NumSignerCerts property and the GetSignerCert method.

Returns null on failure

top

This function verifies a PKCS#7 signed-data binary-encoded signature and returns the original text data. The EncodingMode property determines how p7m is decoded to bytes. If the signature does not verify successfully, it returns an empty string. The Charset property specifies how the original data bytes are converted to characters. You can obtain signer certificates using the NumSignerCerts property and the GetSignerCert method.

Returns null on failure

top

Implements the PBKDF1 algorithm (Password Based Key Derivation Function #1). The password is converted to the character encoding represented by charset before being passed (internally) to the key derivation function. The hashAlg may be md5, sha1, md2, etc. The salt should be random data at least 8 bytes (64 bits) in length. (The GenRandomBytesENC method is good for generating a random salt value.) The iterationCount should be no less than 1000. The length (in bits) of the derived key output by this method is controlled by outputKeyBitLen. The encoding argument may be base64, hex, etc. It controls the encoding of the output, and the expected encoding of the salt. The derived key is returned.

Note: Starting in version 9.5.0.47, if the charset is set to one of the keywords hex or base64, then the password will be considered binary data that is hex or base64 encoded. The bytes will be decoded and used directly as a binary password.

Returns null on failure

top

Implements the PBKDF2 algorithm as follows:

1. Convert password to the character encoding specified by charset before using it in the key derivation function.
2. hashAlg specifies the hash algorithm. Options include sha256, sha384, sha512, md5, sha1, md2, or any algorithm listed in the HashAlgorithm property.
3. Provide a random salt value that is at least 8 bytes (64 bits) long. Use methods like GenRandomBytesENC to generate this salt value.
4. Ensure iterationCount is 1000 or greater.
5. Control the length of the derived key output using outputKeyBitLen.
6. Set encoding to specify the encoding format for the output and the expected encoding for salt. Options include base64 and hex.

The derived key is the output of this process. Internally, PBKDF2 uses a pseudorandom function (PRF), specifically a keyed HMAC. The hash algorithm chosen with hashAlg dictates this PRF; for example, SHA256 uses HMAC-SHA256, while SHA1 uses HMAC-SHA1.

Note: If charset is hex or base64, password is treated as binary data. It will be decoded and used directly as a binary password. SHA256 uses HMAC-SHA256, while SHA1 uses HMAC-SHA1.

PBKDF1 and PBKDF2 are both key derivation functions used to strengthen passwords for cryptographic purposes, but PBKDF2 is the improved version.

• PBKDF1: Older and limited—it can only generate small keys (up to the hash function’s output size), making it less flexible and secure.
• PBKDF2: More advanced—it can generate longer keys, is more resistant to attacks, and is widely recommended for modern security needs.

In short, PBKDF2 is stronger and more versatile than PBKDF1.

Returns null on failure

top

Sets the initialization vector to a random value.

top

Sets the secret key to a random value.

top

This tool allows for conversion between different encodings, such as from base64 to hex. It's particularly useful in programming environments where handling byte arrays is cumbersome. The encodings that can be specified for fromEncoding and toEncoding include: Base64, base64Url, modBase64, Base32, Base58, UU, QP (quoted-printable), URL (URL-encoding), Hex, Q, B, url_oauth, url_rfc1738, url_rfc2396, and url_rfc3986. Note that these encodings are case-insensitive.

Returns null on failure

top

Sets the digital certificate to be used for decryption when the CryptAlgorithm property is set to PKI. A private key is required for decryption. Because this method only specifies the certificate, a prerequisite is that the certificate w/ private key must have been pre-installed on the computer. Private keys are stored in the Windows Protected Store (either a user account specific store, or the system-wide store). The Chilkat component will automatically locate and find the certificate's corresponding private key from the protected store when decrypting.

Returns True for success, False for failure.

top

Sets the digital certificate to be used for decryption when the CryptAlgorithm property is set to PKI. The private key is supplied in the 2nd argument to this method, so there is no requirement that the certificate be pre-installed on a computer before decrypting (if this method is called).

Returns True for success, False for failure.

top

Sets the authenticated additional data from an encoded string. The authenticated additional data (AAD), if any, is used in authenticated encryption modes such as GCM. The aadStr argument can be set to any of the following strings: base64, hex, quoted-printable, ascii, or url.

The Aad is used when the CipherMode is gcm (Galois/Counter Mode), which is a mode valid for symmetric ciphers that have a block size of 16 bytes, such as AES or Twofish.

Returns True for success, False for failure.

top

Sets the expected authenticated tag from an encoded string. The authenticated tag is used in authenticated encryption modes such as GCM. An application would set the expected authenticated tag prior to decrypting. The authTagStr argument can be set to any of the following strings: base64, hex, quoted-printable, ascii, or url.

The authenticated tag plays a role when the CipherMode is gcm (Galois/Counter Mode), which is a mode valid for symmetric block ciphers that have a block size of 16 bytes, such as AES or Twofish.

Note: You can set the authenticated tag to the special value FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF (16 0xFF bytes) to prevent Chilkat from checking the auth tag after decrypting.

Returns True for success, False for failure.

top

Sets the initialization vector from an encoded string. The encoding argument can be set to any of the following strings: base64, hex, quoted-printable, ascii, or url.

top

Sets the secret key from an encoded string. The encoding argument can be set to any of the following strings: base64, hex, quoted-printable, ascii, or url.

top

Sets the password-based encryption (PBE) salt bytes from an encoded string. The encoding argument can be set to any of the following strings: base64, hex, quoted-printable, ascii, or url.

top

Tells the encryption library to use a specific digital certificate for public-key encryption. To encrypt with multiple certificates, call AddEncryptCert once for each certificate. (Calling this method is the equivalent of calling ClearEncryptCerts followed by AddEncryptCert.)

Returns True for success, False for failure.

top

Sets the MAC key to be used for one of the Mac methods.

Returns True for success, False for failure.

top

Sets the MAC key to be used for one of the Mac methods. The encoding can be set to any of the following strings: base64, hex, quoted-printable, or url.

Returns True for success, False for failure.

top

Sets the MAC key to be used for one of the Mac methods.

Returns True for success, False for failure.

top

Accepts a password string and (internally) generates a binary secret key of the appropriate bit length and sets the SecretKey property. This method should only be used if you are using Chilkat for both encryption and decryption because the password-to-secret-key algorithm would need to be identical for the decryption to match the encryption.

There is no minimum or maximum password length. The password string is transformed to a binary secret key by computing the MD5 digest (of the utf-8 password) to obtain 16 bytes. If the KeyLength is greater than 16 bytes, then the MD5 digest of the Base64 encoding of the utf-8 password is added. A max of 32 bytes of key material is generated, and this is truncated to the actual KeyLength required. The example below shows how to manually duplicate the computation.

top

Specifies a certificate to be used when creating PKCS7 digital signatures. Signing requires both a certificate and private key. In this case, the private key is implicitly specified if the certificate originated from a PFX that contains the corresponding private key, or if on a Windows-based computer where the certificate and corresponding private key are pre-installed. (If a PFX file is used, it is provided via the AddPfxSourceFile or AddPfxSourceData methods.)

Returns True for success, False for failure.

top

Specifies a digital certificate and private key to be used for creating PKCS7 digital signatures.

Returns True for success, False for failure.

top

Sets the timestamp authority (TSA) options for cases where a CAdES-T signature is to be created. The http is used to send the requests, and it allows for connection related settings and timeouts to be set. For example, if HTTP or SOCKS proxies are required, these features can be specified on the http.

top

Sets the digital certificate to be used in verifying a signature. In virtually all cases, a PKCS7 (CMS) signature already embeds the signing certificate information, and it is not necessary to explicitly call this method to specify the verification certificate. It is only needed in rare cases.

Returns True for success, False for failure.

top

Digitally signs the content in dataToSign and returns a detached signature (PKCS#7 signed-data) as a binary-encoded string. The EncodingMode property determines the binary-encoding. Possible encodings include base64, base64_mime, hex, and hex_lower. The HashAlgorithm property specifies the hash algorithm for creating the data's hash during signing.

Returns null on failure

top

Creates an asynchronous task to call the SignBdENC method with the arguments provided.

Returns null on failure

top

Digitally signs binary data and returns the binary detached signature (PKCS#7 signed-data). The HashAlgorithm property specifies the hash algorithm for creating the data's hash during signing.

Returns null on failure

top

Creates an asynchronous task to call the SignBytes method with the arguments provided.

Returns null on failure

top

Digitally signs binary data and returns a detached signature (PKCS#7 signed-data) as a binary-encoded string. The EncodingMode property determines the binary-encoding. Possible encodings include base64, base64_mime, hex, and hex_lower. The HashAlgorithm property specifies the hash algorithm for creating the data's hash during signing.

Returns null on failure

top

Creates an asynchronous task to call the SignBytesENC method with the arguments provided.

Returns null on failure

top

Digitally signs a pre-computed hash and returns a detached signature (PKCS#7 signed-data) as a binary-encoded string. The EncodingMode property determines the binary-encoding. Possible encodings include base64, base64_mime, hex, and hex_lower

encodedHash is a binary-encoded hash to be signed, with its encoding format specified by hashEncoding (e.g., base64, hex). hashAlg specifies the hash algorithm (e.g., sha256, sha1, sha512) used for encodedHash.

Returns null on failure

top

Creates an asynchronous task to call the SignHashENC method with the arguments provided.

Returns null on failure

top

Digitally signs the text contained in sb and returns a detached signature (PKCS#7 signed-data) as a binary-encoded string. The EncodingMode property determines the binary-encoding. Possible encodings include base64, base64_mime, hex, and hex_lower. The HashAlgorithm property specifies the hash algorithm for creating the data's hash during signing. The Charset property determines the actual bytes that are hashed and signed.

Returns null on failure

top

Creates an asynchronous task to call the SignSbENC method with the arguments provided.

Returns null on failure

top

Digitally signs a string and returns a the binary detached signature (PKCS#7 signed-data). The HashAlgorithm property specifies the hash algorithm for creating the data's hash during signing. The Charset property determines the actual bytes that are hashed and signed.

Returns null on failure

top

Creates an asynchronous task to call the SignString method with the arguments provided.

Returns null on failure

top

Digitally signs a string and returns a detached signature (PKCS#7 signed-data) as a binary-encoded string. The EncodingMode property determines the binary-encoding. Possible encodings include base64, base64_mime, hex, and hex_lower. The HashAlgorithm property specifies the hash algorithm for creating the data's hash during signing. The Charset property determines the actual bytes that are hashed and signed.

Returns null on failure

top

Creates an asynchronous task to call the SignStringENC method with the arguments provided.

Returns null on failure

top

Implements RFC 6238: TOTP: Time-Based One-Time Password Algorithm. The arguments to this method are:

• secret: The shared secret in an enocded representation such as base64, hex, ascii, etc.
• secretEnc: The encoding of the shared secret, such as base64
• t0: The Unix time to start counting time steps. It is a number in decimal string form. A Unix time is the number of seconds elapsed since midnight UTC of January 1, 1970. 0 is a typical value used for this argument.
• tNow: The current Unix time in decimal string form. To use the current system date/time, pass an empty string for this argument.
• tStep: The time step in seconds. A typical value is 30. Note: Both client and server must pre-agree on the secret, the t0, and the tStep.
• numDigits: The number of decimal digits to return.
• truncOffset: Normally set this to -1 for dynamic truncation. Otherwise can be set in the range 0..15.
• hashAlg: Normally set to sha1. Can be set to other hash algorithms such as sha256, sha512, etc.

Returns null on failure

top

Adds an XML certificate vault to the object's internal list of sources to be searched for certificates and private keys when encrypting/decrypting or signing/verifying. Unlike the AddPfxSourceData and AddPfxSourceFile methods, only a single XML certificate vault can be used. If UseCertVault is called multiple times, only the last certificate vault will be used, as each call to UseCertVault will replace the certificate vault provided in previous calls.

Returns True for success, False for failure.

top

Verifies a detached digital signature against the original data contained in data. Returns True if the signature is verified. The encodedSig holds a binary-encoded PKCS#7 signed-data detached signature. The type of binary encoding, such as base64, hex, or base64_mime, is determined by the EncodingMode property.

Afterwards, you can retrieve signer certificates by using the NumSignerCerts property and the GetSignerCert method.

Returns True for success, False for failure.

top

Verifies a detached digital signature against the original binary data. Returns True if the signature is verified.

Afterwards, you can retrieve signer certificates by using the NumSignerCerts property and the GetSignerCert method.

top

Verifies a detached digital signature against the original binary data. Returns True if the signature is verified. The encodedSig holds a binary-encoded PKCS#7 signed-data detached signature. The type of binary encoding, such as base64, hex, or base64_mime, is determined by the EncodingMode property.

Afterwards, you can retrieve signer certificates by using the NumSignerCerts property and the GetSignerCert method.

top

Verifies an opaque digital signature contained in a .p7m file and extracts the original data to destPath. Returns True if the .p7m is validated and the original data was extracted. Otherwise returns False.

Afterwards, you can retrieve signer certificates by using the NumSignerCerts property and the GetSignerCert method.

Returns True for success, False for failure.

top

Verifies a detached digital signature contained in a .p7s file against the original data contained in originalDataPath. Returns True if the signature is verified.

Afterwards, you can retrieve signer certificates by using the NumSignerCerts property and the GetSignerCert method.

Returns True for success, False for failure.

top

Verifies a detached digital signature against the original text contained in sb. Returns True if the signature is verified. The encodedSig holds a binary-encoded PKCS#7 signed-data detached signature. The type of binary encoding, such as base64, hex, or base64_mime, is determined by the EncodingMode property. The Charset property determines how the text in sb is converted to bytes for signature validation.

Afterwards, you can retrieve signer certificates by using the NumSignerCerts property and the GetSignerCert method.

Returns True for success, False for failure.

top

Verifies a detached digital signature against the original text in str. Returns True if the signature is verified. The sig holds a binary PKCS#7 signed-data detached signature. The Charset property determines how the text in str is converted to bytes for signature validation.

Afterwards, you can retrieve signer certificates by using the NumSignerCerts property and the GetSignerCert method.

Returns True for success, False for failure.

top

Verifies a detached digital signature against the original text in str. Returns True if the signature is verified. The encodedSig holds a binary-encoded PKCS#7 signed-data detached signature. The type of binary encoding, such as base64, hex, or base64_mime, is determined by the EncodingMode property. The Charset property determines how the text in str is converted to bytes for signature validation.

Afterwards, you can retrieve signer certificates by using the NumSignerCerts property and the GetSignerCert method.

Returns True for success, False for failure.

top

Sets the XTS-AES mode data unit number. The data unit number is a 64-bit unsigned integer. It is passed in as two 32-bit unsigned integers representing the high and low 32-bits.

Setting the data unit number is one way of setting the tweak value. The tweak value is 16 bytes in length and can alternatively be set by calling XtsSetEncodedTweakValue.

This method sets the tweak value such that the first 8 bytes are composed of the little-endian 64-bit data unit number, followed by 8 zero bytes.

(Unfortunately, Chilkat cannot use 64-bit integers in method arguments because many older programming environments, such as ActiveX, do not support it. Chilkat must present an identical and uniform API across all programming languages.)

top

Sets the XTS-AES mode tweak key from an encoded string. The encoding argument can be set to any of the following strings: base64, hex, quoted-printable, ascii, or url. The tweak key should be equal in size to the encryption key. For example, to do 256-bit AES-XTS, the encryption key is 256-bits, and the tweak key is also 256-bits.

top

Sets the XTS-AES mode tweak value from an encoded string. The encoding argument can be set to any of the following strings: base64, hex, quoted-printable, ascii, or url.

The tweak value must be 16 bytes in length. An application can set the initial tweak value by calling this method, or by calling XtsSetDataUnitNumber (but not both).

top

Applications should instead call BinData.AppendEncoded to append binary encoded data (such as base64) to a BinData object. The decoded binary bytes can then be obtained from the BinData object.

Decode binary data from an encoded string. The encoding can be set to any of the following strings: base64, hex, quoted-printable, url, base32, Q, B, url_rc1738, url_rfc2396, url_rfc3986, url_oauth, uu, modBase64, or html (for HTML entity encoding).

Returns null on failure

top

This method is deprecated. Applications should implement streaming decryption by using the FirstChunk and LastChunk properties.

Returns True for success, False for failure.

top

Creates an asynchronous task to call the DecryptStream method with the arguments provided.

Returns null on failure

top

This method is deprecated. Applications should implement streaming encryption or decryption by using the FirstChunk and LastChunk properties.

Returns True for success, False for failure.

top

Creates an asynchronous task to call the EncryptStream method with the arguments provided.

Returns null on failure

top

This method is deprecated and should be avoided because it transforms the password into a binary secret key using a transformation that is undocumented and specific to this Chilkat method. PBKDF2 is a standard and more secure method of generating a binary secret key from a password. An example using PBKDF2 is shown below.

This method converts a string into a byte array matching the bit length of the KeyLength property. For instance, if KeyLength is 128 bits, the resulting array will be 16 bytes. This byte array can be assigned to the SecretKey property. For decryption to work, the SecretKey must match exactly. To use password-based encryption, pass the password to this method to generate an appropriate binary secret key for the SecretKey property.

IMPORTANT: Do not use this method to decrypt data if another party has provided you with the secret key. It is intended to transform a password of any length into a correctly sized binary secret key.

Returns null on failure

top

This method is deprecated. Application should instead call LastDecryptCert

Returns the last certificate used for public-key decryption.

Returns null on failure

top

This method is deprecated. Application should instead call LastSignerCert

Gets the Nth certificate used for signing. This method can be called after verifying a digital signature to get the signer certs. The 1st certificate is at index 0. The NumSignerCerts property contains the total number of signing certificates. (Typically, a single certificate is used in creating a digital signature.)

Returns null on failure

top

This method is deprecated. Applications can get the cert chain by calling LastSignerCert to get the certificate object, and then get the certificate chain from the certificate object.

Returns the full certificate chain for the Nth certificate used to for signing. Indexing begins at 0.

Returns null on failure

top

This method is deprecated. Please use GetLastJsonData instead. GetLastJsonData provides details about the most recently executed method. While many methods don't provide additional information, some do, such as after verifying a signature. In such cases, LastJsonData will return JSON with details like the algorithms used in the verification process.

Returns null on failure

top

This method is the same as VerifyP7S. Applications should instead call VerifyP7S.

top