CkoJws

If set to a file path, causes each Chilkat method or property call to automatically append it's LastErrorText to the specified log file. The information is appended such that if a hang or crash occurs, it is possible to see the context in which the problem occurred, as well as a history of all Chilkat calls up to the point of the problem. The VerboseLogging property can be set to provide more detailed information.

This property is typically used for debugging the rare cases where a Chilkat method call hangs or generates an exception that halts program execution (i.e. crashes). A hang or crash should generally never happen. The typical causes of a hang are:

1. a timeout related property was set to 0 to explicitly indicate that an infinite timeout is desired,
2. the hang is actually a hang within an event callback (i.e. it is a hang within the application code), or
3. there is an internal problem (bug) in the Chilkat code that causes the hang.

Provides information in HTML format about the last method/property called. If a method call returns a value indicating failure, or behaves unexpectedly, examine this property to get more information.

Provides information in plain-text format about the last method/property called. If a method call returns a value indicating failure, or behaves unexpectedly, examine this property to get more information.

Provides information in XML format about the last method/property called. If a method call returns a value indicating failure, or behaves unexpectedly, examine this property to get more information.

Indicate whether the last method call succeeded or failed. A value of YES indicates success, a value of NO indicates failure. This property is automatically set for method calls. It is not modified by property accesses. The property is automatically set to indicate success for the following types of method calls:

• Any method that returns a string.
• Any method returning a Chilkat object, binary bytes, or a date/time.
• Any method returning a standard boolean status value where success = YES and failure = NO.
• Any method returning an integer where failure is defined by a return value less than zero.

Note: Methods that do not fit the above requirements will always set this property equal to YES. For example, a method that returns no value (such as a "void" in C++) will technically always succeed.

The number of signatures contained in this JWS.

Controls whether to use the JWS Compact Serialization or JWS JSON Serialization when creating JWSs. The default value is YES, which is to choose the compact serialization when possible. If multiple signatures exist, or if any unprotected headers exist, then JWS JSON Serialization is used regardless of this property setting.

Controls whether to use the flattened or general JWE JSON Serialization when creating JWSs. The default value is YES, which is to choose the flattened serialization when possible. If multiple signatures exist, then the general (non-flattened) JWS JSON Serialization is used regardless of this property setting.

This is a catch-all property to be used for uncommon needs. This property defaults to the empty string and should typically remain empty.

If set to YES, then the contents of LastErrorText (or LastErrorXml, or LastErrorHtml) may contain more verbose information. The default value is NO. Verbose logging should only be used for debugging. The potentially large quantity of logged information may adversely affect peformance.

Version of the component/library, such as "9.5.0.94"

Creates and returns the JWS containing one or more signatures according to the previously set payload, headers, and keys.

Returns nil on failure

Creates and returns the JWS by appending it to the contents of sbJws.

Returns YES for success, NO for failure.

Returns the JWS payload. The charset specifies the byte representation to be used in interpreting the bytes of the payload. (For example, "utf-8", "windows-1252", "utf-16", etc.)

Returns nil on failure

Returns the JWS payload by appending it to the binData.

Returns YES for success, NO for failure.

Returns the JWS payload by appending it to the sbPayload. The charset specifies the byte representation to be used in interpreting the bytes of the payload. (For example, "utf-8", "windows-1252", "utf-16", etc.)

Returns YES for success, NO for failure.

Returns the protected header for the Nth signature. The index is the index of the signature. The 1st signature is at index 0. In most cases, a JWS contains a single signature at index 0.

Returns nil on failure

Returns the optional unprotected header for the Nth signature. The index is the index of the signature. The 1st signature is at index 0. In most cases, a JWS contains a single signature at index 0.

Returns nil on failure

Loads a JWS contained in jwsStr.

Returns YES for success, NO for failure.

Loads a JWS from the contents of sbJws.

Returns YES for success, NO for failure.

Sets the MAC key to be used for creating or validating a signature for the algorithms "HS256", "HS384", or "HS512". The key is an encoded string representation of the MAC key bytes. The encoding is an encoding, such as "base64url", "base64", "hex", etc. The 1st signature is at index 0. (Most JWSs only contain a single signature.)

Returns YES for success, NO for failure.

Sets the MAC key to be used for creating or validating a signature for the algorithms "HS256", "HS384", or "HS512". The key contains the binary bytes of the MAC key for the Nth signature. The 1st signature is at index 0.

Returns YES for success, NO for failure.

Sets the JWS payload from the contents of payload. The charset specifies the byte representation to be used for the string that is to be the payload. (For example, "utf-8", "windows-1252", "utf-16", etc.). If includeBom is YES, then the byte-order-mark (BOM), also known as preamble, if one exists for the given charset, is included in the payload. Normally, includeBom should be set to NO.

Returns YES for success, NO for failure.

Sets the JWS payload from the contents of binData.

Returns YES for success, NO for failure.

Sets the JWS payload from the contents of sbPayload. The charset specifies the byte representation to be used for the string that is to be the payload. (For example, "utf-8", "windows-1252", "utf-16", etc.). If includeBom is YES, then the byte-order-mark (BOM), also known as preamble, if one exists for the given charset, is included in the payload. Normally, includeBom should be set to NO.

Returns YES for success, NO for failure.

Sets the private key (ECC or RSA) to be used in creating a signature for the following algorithms:

RS256
RS384
RS512
ES256
ES384
ES512
PS256
PS384
PS512

   +--------------+-------------------------------+--------------------+
   | "alg" Param  | Digital Signature or MAC      | Implementation     |
   | Value        | Algorithm                     | Requirements       |
   +--------------+-------------------------------+--------------------+
   | HS256        | HMAC using SHA-256            | Required           |
   | HS384        | HMAC using SHA-384            | Optional           |
   | HS512        | HMAC using SHA-512            | Optional           |
   | RS256        | RSASSA-PKCS1-v1_5 using       | Recommended        |
   |              | SHA-256                       |                    |
   | RS384        | RSASSA-PKCS1-v1_5 using       | Optional           |
   |              | SHA-384                       |                    |
   | RS512        | RSASSA-PKCS1-v1_5 using       | Optional           |
   |              | SHA-512                       |                    |
   | ES256        | ECDSA using P-256 and SHA-256 | Recommended+       |
   | ES384        | ECDSA using P-384 and SHA-384 | Optional           |
   | ES512        | ECDSA using P-521 and SHA-512 | Optional           |
   | PS256        | RSASSA-PSS using SHA-256 and  | Optional           |
   |              | MGF1 with SHA-256             |                    |
   | PS384        | RSASSA-PSS using SHA-384 and  | Optional           |
   |              | MGF1 with SHA-384             |                    |
   | PS512        | RSASSA-PSS using SHA-512 and  | Optional           |
   |              | MGF1 with SHA-512             |                    |
   | none         | No digital signature or MAC   | Optional           |
   |              | performed                     |                    |
   +--------------+-------------------------------+--------------------+

Returns YES for success, NO for failure.

Sets a signature's protected header. The index is the index of the signature. The 1st signature is at index 0. In most cases, a JWS contains a single signature at index 0.

Returns YES for success, NO for failure.

Sets the public key (ECC or RSA) to be used in validating a signature for the following algorithms:

RS256
RS384
RS512
ES256
ES384
ES512
PS256
PS384
PS512

Returns YES for success, NO for failure.

Sets a signature's optional unprotected header. The index is the index of the signature. The 1st signature is at index 0. In most cases, a JWS contains a single signature at index 0.

Returns YES for success, NO for failure.

Validates the Nth signature or MAC using the Nth public key or MAC key.

Returns 1 if the signature was validated, thus verifying that the signer used the same MAC key or the matching private key.
Returns 0 if the incorrect public key or MAC key was provided.
Returns -1 for any other error, such as if no public key or MAC key was previously set for the given index.

Prior to calling this method, a program should provide the public key or MAC key via the SetPublicKey, SetMacKey, or SetMacKeyBd methods.